Specifications:

– 250 mm travel
– Quality ballscrew with accuracy up to ±0.02 mm, also low noise when working
– 12 mm ballscrew with 4 mm pitch & 12 mm linear rail
– Includes home and limit sensor
– Can be used as X, Y or Z axis.
– Stepper motor 1.2 Nm 57HS56 & Stepper Motor Driver are included
– Material: Aluminum AL6061 & Anodized

Product Origin: ROBOT3T, Vietnam

The post LSA3T-01: Linear Stage Actuator 250 mm With Stepper Motor appeared first on Robot 3T.

250kg Payload Rotating Base supporting 3 control modes:

Mode 1: Manual control mode
Mode 2: Automatic control mode according to the set speed
Mode 3: Automatic control mode according to the installation position

Specifications:

• Payload: 250 kg
• Base Diameter: 450 mm
• Maximum Speed: 20 RPM
• Input power: single-phase 200 – 240 VAC
• Repeatability: +/- 0.01 degree
• Using AC Servo Motor 750 W
• High precision harmonic gearbox
• Materials: Steel + Aluminum AL6061 & Anodized
• The warranty period 12 months

Product Origin: ROBOT3T, Vietnam

The post 250kg Payload Rotating Base appeared first on Robot 3T.

1 & 2-axis motion controller for precision and high-speed control applications. The product has been applied in many industrial systems such as servo feeder, CNC bending machine, CNC flange drilling machine, CNC beam drilling machine, servo turntable, XY table and many servo control system 1 and 2 axis in industrial.

Specifications:

• Supports simultaneous 2-axis linear interpolation.
• The maximum pulse frequency output : 2 MHz
• Compatible with Industrial HMI via Modbus RTU or ACSII
• Support various machinery & system control programs
• 12 channels of isolated input.
• 12 output channels..
• Support update the firmware by application.
• Warranty Period: 12 months

Product Origin: Robot3T, Viet Nam

Video demo::

Application Videos:

The post MCC-01: 1 & 2-axis motion controller for precision control system appeared first on Robot 3T.

LMS3T-01 is a set of two perpendicular sliders X and Y, triggered by ball screws driven and guided by a linear guide with two square rails. This is a cost effective solution for general applications in automation.

Specifications

• The movement of Y axis: 750mm
• The movement of X axis: 300 mm
• Payload of the XY table: 10 kg
• The accuracy: +/- 0.25mm
• The maximum speed: 15 m/min
• Using Yaskawa AC Servo motors for XY
• The height of XY table is 120mm.
• Using Aluminum AL6061 and all anodized parts.
• All parameters are customizable according to the application.

Videos of XY table application in automatic filling system:

The post LMS3T-01: XY Linear Table for Automation Applications appeared first on Robot 3T.

360 degree metal 100kg load capacity rotating base support position and speed control for robotics application.

Specifications:

• Payload: 100 kg
• Base Diameter: 300 mm
• Maximum Speed: 30 RPM
• Input power: single-phase 200 – 240V or three-phase 360V-400V
• Control mode: position Step/Dir and speed +/-10V
• Repeatability: +/- 0.01 degree
• Using AC Servo Motor + Harmonic Gear
• Materials: Steel + Aluminum AL6061 & Anodized
• Weight: 35kg
• The warranty period 12 months

Product Origin: ROBOT3T, Vietnam

The post 100kg Payload Rotating Base appeared first on Robot 3T.

DC Servo Driver DCS3T-27 serve applications precise motion control in manufacturing machinery and robotics

Specifications

• Rated power from 500W, maximum supply voltage of 100 VDC.
• Support all kinds of DC Servo motor.
• Software adjusts parameters of PID controller.
•  Position control mode with STEP/DIR, suitable with CNC application.
• CAN communication support multiple motor controllers on a network.
• DIR signal input and isolation PULSE input with high speed.
• Overcurrent protection and overvoltage.
• Support for the integrated use of this product for control applications.
• Load capacity and working in high noise environments.
• The warranty period 12 months

Connection Diagram

Product Origin: ROBOT3T, Vietnam

Link to download the user manual: Operation Manual DCS3T-28_V2

The post DCS3T-27: DC Servo motor driver 500W appeared first on Robot 3T.